Entek Hide Menu

133MM

133mm_for_web

133MM Twin-Screw Extruder Spec Sheet

Diameter133 mm
RotationCo-Rotating
Length28-48 L/D
Screw Center Distance (mm)110
Screw Do/Di Ratio1.55
Flight Depth (mm)23.6
Free Area, 2-Flight (cm2)101.1
Shafts24 Tooth Involute Spline

FormSquare, Flanged
Length510 mm
CoolingInternal Liquid Cooling
Open Barrel Heat Zone
18.8 kW Aluminum
Closed Barrel Heat Zone
22.5 kW Aluminum

Std. Gearbox Ratios1.75 / 2.92 / 3.8 / 5.8
Screw Speeds1000 / 600 / 460 / 300 rpm
Motor @ 1750 rpm4000 / 2500 / 2000 / 1250 hp
Motor Equivalent in Watts2.98 / 1.86 / 1.49 / 0.93 MW
Voltage Options380 / 415 / 460 / 575 Volt
Standard Motor ControllerAC

Standard Machine Configuration: 1 Feed Barrel, 9 Solid Barrels (6 Aluminum, 3 Bronze/Cast Iron), 1 Vent Barrel, Gear Box Lube 40mm and Up, Barrel Cooling Pump, Main Motor Blowers 400 hp and Up

ControllerEthernet PLC with Color Computer Interface
Heat/Cool ZonesUp to 16 Standard (additional upon request)

Installed Cooling Capacity (gearbox and barrel)Consult ENTEK Engineering for Specific Applications
Typical CoolingConsult ENTEK Engineering for Specific Applications
Est. Power Requirements*Consult ENTEK Engineering for Specific Applications
Centerline Height1345 mm [53 in]
Length, 48D11785 mm [464 in]
Width2185 mm [86 in]
Height (top of motor)2030 mm [80 in]
Weight (approx.)31000 kg [70000 lb]

* - Standard Machine Configuration: 1 Feed Barrel, 9 Solid Barrels (6 Aluminum, 3 Bronze/Cast Iron), 1 Vent Barrel, Gear Box Lube 40mm and Up, Barrel Cooling Pump, Main Motor Blowers 400hp and Up


Loading