Entek Hide Menu

53MM

53MM ENTEK Extruder

53MM Twin-Screw Extruder Spec Sheet

Diameter53 mm
RotationCo-Rotating
Length28-52 L/D
Screw Center Distance (mm)43
Screw Do/Di Ratio1.62
Flight Depth (mm)10.0
Free Area, 2-Flight (cm2)17.2
Shafts24 Tooth Involute Spline

FormSquare, Flanged
Length210 mm
CoolingInternal Liquid Cooling
Open Barrel Heat Zone
3.4 kW Aluminum
Closed Barrel Heat Zone
4.0 kW Aluminum

Std. Gearbox Ratios1.46 / 2.92
Screw Speeds1200 / 600 rpm
Motor @ 1750 rpm300 / 150 hp
Motor Equivalent in Watts224 / 112 kW
Voltage Options380 / 415 / 460 / 575 Volt
Standard Motor ControllerAC

Standard Machine Configuration: 1 Feed Barrel, 9 Solid Barrels (6 Aluminum, 3 Bronze/Cast Iron), 1 Vent Barrel, Gear Box Lube 40mm and Up, Barrel Cooling Pump, Main Motor Blowers 400hp and Up

ControllerEthernet PLC with Color Computer Interface
Heat/Cool ZonesUp to 16 Standard (additional upon request)

Installed Cooling Capacity (gearbox and barrel)28 tons (354,420 kj) [81 kW] @ 150 hp and 600 rpm
Typical Cooling6.3 tons (79,750 kj)
Est. Power Requirements*287A Power, Minimum Breaker 300 Amps
Centerline Height1090 mm [43 in]
Length, 48D5410 mm [213 in]
Width1030 mm [40.5 in]
Height (top of motor)1470 mm [58 in]
Weight (approx.)5440 kg [12000 lb]

* - Standard Machine Configuration: 1 Feed Barrel, 9 Solid Barrels (6 Aluminum, 3 Bronze/Cast Iron), 1 Vent Barrel, Gear Box Lube 40mm and Up, Barrel Cooling Pump, Main Motor Blowers 400hp and Up


Loading