Screws
| Diameter | 133 mm |
|---|---|
| Rotation | Co-Rotating |
| Length | 28-48 L/D |
| Screw Center Distance (mm) | 110 |
| Screw Do/Di Ratio | 1.55 |
| Flight Depth (mm) | 23.6 |
| Free Area, 2-Flight (cm2) | 101.1 |
| Shafts | 24 Tooth Involute Spline |
Barrels
| Form | Square, Flanged | ||
|---|---|---|---|
| Length | 510 mm | ||
| Cooling | Internal Liquid Cooling | ||
| Open Barrel Heat Zone |
|
||
| Closed Barrel Heat Zone |
|
Drive Systems
| Std. Gearbox Ratios | 1.75 / 2.92 / 3.8 / 5.8 |
|---|---|
| Screw Speeds | 600 / 300 rpm |
| Motor @ 1750 rpm | 2000 / 1000 hp |
| Motor Equivalent in Watts | 2.98 / 1.86 / 1.49 / 0.93 MW |
| Voltage Options | 380 / 415 / 460 / 575 Volt |
| Standard Motor Controller | AC |
Standard Machine Configuration: 1 Feed Barrel, 9 Solid Barrels (6 Aluminum, 3 Bronze/Cast Iron), 1 Vent Barrel, Gear Box Lube 40mm and Up, Barrel Cooling Pump, Main Motor Blowers 400 hp and Up
Controls
| Controller | Ethernet PLC with Color Computer Interface |
|---|---|
| Heat/Cool Zones | Up to 16 Standard (additional upon request) |
Size & Utilities
| Installed Cooling Capacity (gearbox and barrel) | Consult ENTEK Engineering for Specific Applications |
|---|---|
| Typical Cooling | Consult ENTEK Engineering for Specific Applications |
| Est. Power Requirements* | Consult ENTEK Engineering for Specific Applications |
| Centerline Height | 1345 mm [53 in] |
| Length, 48D | 11785 mm [464 in] |
| Width | 2185 mm [86 in] |
| Height (top of motor) | 2030 mm [80 in] |
| Weight (approx.) | 31000 kg [70000 lb] |
* – Standard Machine Configuration: 1 Feed Barrel, 9 Solid Barrels (6 Aluminum, 3 Bronze/Cast Iron), 1 Vent Barrel, Gear Box Lube 40mm and Up, Barrel Cooling Pump, Main Motor Blowers 400hp and Up