HR3133

133MM Twin-Screw Extruder

Masterbatch compounding; Up to 2500 HP; 300 or 600 RPM.
ENTEK Twin Screw - HR3 103MM

Screws

Diameter 133 mm
Rotation Co-Rotating
Length 28-48 L/D
Screw Center Distance (mm) 110
Screw Do/Di Ratio 1.55
Flight Depth (mm) 23.6
Free Area, 2-Flight (cm2) 101.1
Shafts 24 Tooth Involute Spline

Barrels

Form Square, Flanged
Length 510 mm
Cooling Internal Liquid Cooling
Open Barrel Heat Zone
18.8 kW Aluminum
Closed Barrel Heat Zone
22.5 kW Aluminum

Drive Systems

Std. Gearbox Ratios 1.75 / 2.92 / 3.8 / 5.8
Screw Speeds 600 / 300 rpm
Motor @ 1750 rpm 2000 / 1000 hp
Motor Equivalent in Watts 2.98 / 1.86 / 1.49 / 0.93 MW
Voltage Options 380 / 415 / 460 / 575 Volt
Standard Motor Controller AC

Standard Machine Configuration: 1 Feed Barrel, 9 Solid Barrels (6 Aluminum, 3 Bronze/Cast Iron), 1 Vent Barrel, Gear Box Lube 40mm and Up, Barrel Cooling Pump, Main Motor Blowers 400 hp and Up

Controls

Controller Ethernet PLC with Color Computer Interface
Heat/Cool Zones Up to 16 Standard (additional upon request)

Size & Utilities

Installed Cooling Capacity (gearbox and barrel) Consult ENTEK Engineering for Specific Applications
Typical Cooling Consult ENTEK Engineering for Specific Applications
Est. Power Requirements* Consult ENTEK Engineering for Specific Applications
Centerline Height 1345 mm [53 in]
Length, 48D 11785 mm [464 in]
Width 2185 mm [86 in]
Height (top of motor) 2030 mm [80 in]
Weight (approx.) 31000 kg [70000 lb]

* – Standard Machine Configuration: 1 Feed Barrel, 9 Solid Barrels (6 Aluminum, 3 Bronze/Cast Iron), 1 Vent Barrel, Gear Box Lube 40mm and Up, Barrel Cooling Pump, Main Motor Blowers 400hp and Up

Translate »